Brocade Communications Systems WFT-2D User Manual page 357

•
•
•
•
•
•
•
•
•
•
•
•
•
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Port Encode Out Errors monitor
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
CRC Errors — The number of CRC errors.
Link Failures — The number of link failures.
Invalid Transmissions — The number of invalid transmissions.
Product — The product affected by this monitor.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number — The port number.
State — The port state (for example, Enabled).
Status — The port status (for example, Up).
Refreshed — The time of the last update for the monitor.
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1411.
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to "Performance Data"
Performance monitors
on page 323.
"Application menus"
on page 1067.
7
on
305