Top Port Link Resets Monitor - Brocade Communications Systems WFT-2D User Manual

To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Port Link Failures monitor
•
•

Top Port Link Resets monitor

The Top Port Link Resets monitor
FIGURE 132
The Top Port Link Resets monitor includes the following data:
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1411.
Double-click a row to navigate to the SAN Historical Graphs/Tables dialog box. For more
information, refer to "Performance Data"
Top Port Link Resets monitor
Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
Port — The port affected by this monitor.
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
RX Link Resets /sec — The number (error rate) receive link reset errors per second for the
duration specified in the monitor.
RX Link Resets — The number (error count) of receive link reset errors.
on page 1067.
(Figure 132) displays the top ports with link resets in a table.
Performance monitors
on page 323.
"Application menus" on
7
307