Relation With Other Functions - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.36 External Search

14.36.7 Relation with Other Functions

Control unit-side high-speed program server mode
If there is no specification for the control unit-side high-speed program server mode, you cannot designate "4" (high-speed
program server) as the external search device No.
If you designate it and execute the external search, the external search status will be "3" (any non-existent or inoperative
device has been designated)
Display unit-side high-speed program server mode
If there is no specification for the display unit-side high-speed program server mode, you cannot designate "1" as the external
search device No.
If you designate it and execute the external search, the external search status will be "3" (any non-existent or inoperative
device has been designated)
Operation search related function
In case that you enable returning to the previous program before external search and then execute a search operation such
as operation search, the control fails to return to the previous program before the external search.
Macro interrupt
In case that you enable returning to the previous program before external search and then execute a macro interruption after
completing the external search or while the externally searched program is running, the control fails to return to the previous
program before the external search.
HD operation with industrial personal computer
When HD operation with industrial personal computer is disabled, you cannot designate "7" as the external search device No.
(R2525). If you designate it and execute the external search, the external search status (R500) will be "3" (any non-existent or
inoperative device has been designated).
IB-1501668-B 874