Linking With Multi-Project - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.23 PLC Switches

14.23.6 Linking with Multi-Project

This chapter explains the operations in case that the PLC message files created by the PLC development software (GX
Developer) are stored in multiple projects when multi-project function is valid.
When the message files are stored in multiple projects, the combination of the PLC switch name written in the message file in
each project will be displayed.
When the same PLC switch name is written in multiple projects, the PLC switch name of the message file stored in the project
with small No. will be displayed.
[When the PLC switch names do not overlap]
Project 1
Message file
Switch #1 name: Proj1 Sw1
Switch #2 name: Proj1 Sw2
Project 2
Message file
Switch #3 name: Proj2 Sw3
Switch #4 name: Proj2 Sw4
[When the PLC switch names overlap]
Project 1
Message file
Switch #1 name: Proj1 Sw1
Switch #2 name: Proj1 Sw2
Switch #3 name: Proj1 Sw3
Switch #4 name: Proj1 Sw4
Project 2
Message file
Switch #3 name: Proj2 Sw3
Switch #4 name: Proj2 Sw4
The PLC switch names described in message files of
each project are combined and displayed.
When the PLC switch names overlap, the name of the
project with a smaller No. will be displayed.
717 IB-1501668-B