Relation With Other Functions - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.22 Operator Message Display

14.22.6 Relation with Other Functions

Macro alarm message (#3000, #3006)
The macro alarm message is displayed in the first line of the operator message area.
If you use R2560 to display an operator message, the message which is output later will be displayed.
While the macro alarm message is displayed, up to three operator messages in F or R type can be displayed.
When a macro alarm message specified using machining program is displayed, all spaces are to be deleted.
When variable #3000 is issued in the machining program, the message of the alarm No. specified by variable No. #3000 is
extracted from the message file to be displayed. (Note that variable No. #3006 cannot be used to extract the corresponding
message.)
In advance, describe the data such as macro alarm message No. and message itself in the message file, and import the file
into the NC.
For details on creating a message file, refer to "PLC Development Manual".
Macro alarm message
Operator message
707 IB-1501668-B