Usage Example - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.17 Change the Area of Stored Stroke Limit I

14.17.2 Usage Example

Illustrated below is an operation example when you change the area of stored stroke limit I for X and Y axes using the stored
stroke limit I area change at a T command.
(To present the relation with the set values in an easy-to-understand manner, both X and Y axes are handled as radius
designation axes in this example.)
[Parameter settings]
#1005(plcunit) : C
#1278(ext14)bit2 : ON
#2190(OT_rrag) : Xaxis_9800
Yaxis_9810
#2013(OT-) : -100.0(X), -100.0(Y)
#2014(OT+) : +1600.0(X), 400.0(Y)
[Machining program]
N1 G90 G28 XY
N2 G00 X100.0 Y100.0
N3 T1010
N4 G01 X1000. Y500.
N5 G01 X200.
Y
600.0
400.0
N1
N2
−
100.0
−
50.0
−
100.0
−
200.0
X axis' OT- of (2)
X axis' OT- of (1)
N4
800.0
X axis' OT+ of (2)
657
Y axis' OT+ of (2)
Y axis' OT+ of (1)
X
1600.0
Y axis' OT- of (1)
Y axis' OT- of (2)
X axis' OT+ of (1)
IB-1501668-B