M800V/M80V Series PLC Programming Manual (1/2)
2 PLC Processing Program
2.7 User PLC Data Area Configuration and Size
2.7.1 Single-Program Method
P4001
(high-speed)
P4002
(Medium
speed)
Sequence
program area
Main processing
2.7.2 Multi-Program Method
Sequence
program area
Sequence program storage area
High-speed
The program other than main processing is not requirement.
processing
The program order of initialization, high-speed and main is
arbitrary.
The storable step No. differs according to each project.
Program 1
Sequence program storage area
It is possible to divide and store the initialization, high-speed,
Program 2
and standby processing into multiple programs by the control units.
The storing order of the program is arbitrary.
Program 3
At least, one main processing needs to exist.
The storable step No. differs according to each project.
Program n
13
IB-1501667-B