Plc Interface - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.11 Coordinate Rotation by Parameter

14.11.4 PLC Interface

Con-
Signal name
tact
COORDINATE ROTATION BY PARAM-
A ETER: MANUAL FEED COORDINATE
SYSTEM
[Function]
This signal notifies the coordinate system which operates with the manual operation (jog feed, incremental feed and
manual handle feed) during the coordinate rotation by parameter.
[Operation]
When this signal is turned OFF, the manual operation will be operated with the machine coordinate system.
When this signal is turned ON, the manual operation will be operated with the coordinate system rotated by the coordinate
rotation by parameter.
When the coordinate rotation by parameter is invalid, this signal will be turned OFF even though the Coordinate rotation by
parameter: Coordinate switch for manual feed (YC7F) is turned ON.
Y
M
Y
W
Machine coordinate zero point
When "Coordinate rotation by parameter: Coordinate switch for
manual feed" signal is OFF.
[Related signals]
(1) Coordinate rotation by parameter: Coordinate switch for manual feed (YC7F)
Con-
Signal name
tact
Coordinate rotation by parameter: Coor-
A
dinate switch for manual feed
[Function]
This signal specifies whether or not the manual operation (jog feed, incremental feed, manual handle feed) operates with
the coordinate system rotated by the coordinate rotation by parameter.
[Operation]
When this signal is turned OFF, the manual operation will be operated with the machine coordinate system.
When this signal is turned ON, the manual operation will be operated with the coordinate system rotated by the coordinate
rotation by parameter.
[Related signals]
(1) Coordinate rotation by parameter: Manual feed coordinate system (XC5F)
IB-1501668-B
Signal ab-
$1
breviation
XC5F
X axis movement in
manual operation
X
W
Workpiece coordinate
zero point
X
M
Signal ab-
$1
breviation
YC7F
$2 $3 $4
XD9F XEDF X101F
Y
M
X axis movement in
Y
W
manual operation
Machine coordinate zero point
When "Coordinate rotation by parameter: Coordinate switch for
manual feed" signal is ON.
$2 $3 $4
YDBF YEFF Y103F
622
$5 $6 $7
X115F X129F X13DF X151F
X
W
Workpiece coordinate
zero point
X
M
$5 $6 $7
Y117F Y12BF Y13FF Y153F
$8
$8