Mitsubishi Electric M800VW Series Programming Manual page 752

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.26 Simple Inclined Surface Machining Command
[Setting of tool axis rotation angle compensation amount (when "#1450 5axis_Spec/bit1" is "1")]
Basic position rotation
angle
Z (-) direction
Spindle
0°
Tool "A"
Workpiece
Rotate the target tool by the basic position rotation
angle, then issue G174/G53.1 command.
When commanding the simple tool center point control (G174) after canceling the tool center point control modal (G174)
or when re-commanding the tool axis direction control (G53.1), rotate the target tool up to the "reference position rotation
angle" again, and then command the simple tool center point control (G174) or tool axis direction control (G53.1).
X(+)
Z(+)
731 IB-1501668-B