Mitsubishi Electric M800VW Series Programming Manual page 263

M800V/M80V Series PLC Programming Manual (1/2)
8 Function Instructions
8.4 Data Transfer Instructions
S.TMOV: Transfer of timer and counter setting value
Setting
Bit devices
data
X Y M L F
S
D
[Instruction symbol] [Execution condition]
S.TMOV
 Setting data
Setting data
S No. of timer and counter device to which setting value is transferred.
D Device No. of the transfer destination
 Functions
 The setting value of timer and counter device specified with S is transferred to the device specified with D.
Note that, however, the actual setting value is transferred only if specified with constant.
If the setting value is specified with word device, normal transfer will not be carried out.
Setting value designation method with the
Timer setting
Fixed timer setting Constant designation
Word device designation
Variable timer set- Constant designation
ting
Word device designation
Note
(1) When this instruction is monitored, the current value is displayed on the timer and counter device specified with S.
(2) If the timer and counter device are used with any function instructions other than above, everything indicates the cur-
rent value.
 Operation errors
 There are no arithmetic errors associated with the "S.TMOV" instruction.
IB-1501667-B
Usable devices
B SB T SM V T C
○ ○
Command
Meaning
timer output instruction
OUT Tx Kn
OUT Tx Dn
OUT Tx Kn
OUT Tx Dn
Con-
Word devices
stant
D R/ZR W SW SD Z K
○ ○ ○ ○ ○
Setting value to be transferred by TMOV
Constant "n"
○
× Constant 0(zero)
Setting value set with the setting display
○
× Setting value set with the setting display
242
Digit
Pointer designa- Index
tion
H P
○
S.TMOV S D
Data type
BIN 16 bits