Operator Message Display - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function

14.22 Operator Message Display

14.22 Operator Message Display
When a condition to inform the operator of a message occurs, an operator message can be displayed independently of an
alarm message.
A maximum of 55 characters can be displayed for the operator message in one line on the PLC message screen. When the
message cannot fit on one line, the message is displayed over two lines.
Up to 4 operator messages can be displayed at a time.
Format
Max. number of messages 512 messages
Max. data length 60 bytes per message
Number of display messag-
Max. 4 messages
es
F type / R type (supplementary information
Interface
designated)
Store method User PLC attached data
Operator message
699 IB-1501668-B