Mitsubishi Electric M800VW Series Programming Manual page 725

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.22 Operator Message Display
Supplementary information display
The supplementary information can be displayed after the message regardless of the F type or R type. (Refer to
"Supplementary information display" in this chapter.)
For the supplementary information, the contents of each data register specified in alarm message preparation are displayed.
When the data register is set as independent device among projects (the device which can be used in multiple projects
independently), the contents of the data register which is displayed when the multi project function is valid will be the contents
of data register in project 1.
If you want to display data of any project other than Project 1, set the data register as common device among projects (a
device which is affected by the access from multiple projects). (For details, refer to the section regarding the device
commonizing setting in "4 Explanation of Devices".)
IB-1501668-B 704