Mitsubishi Electric M800VW Series Programming Manual page 899

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.37 Direct Screen Selection
[Setting range when DIRECT_SCREEN of config.ini is "1" and the screen/window No. is designated]
Screen Value of R357
Monitor screen 1
Setup screen 2
Edit screen 3
Diagnosis screen 4
Maintenance screen 5
SFP screen 9
F0 screen (*1) 10
Window display 13
Window selection 14
(*1) When F0 screen is designated, the Customization screen is always displayed regardless of the on-board ON parameter
(#6451).
(*2) The window of designated No. can be displayed only when the Customization screen is displayed using the NC
Designer Interpreter method/Compilation method which was designated with the main menu of R358.
The main menu No. and the sub menu No. on the Monitor to Maintenance screens can be designated using the position from
the left end of menu.
If you designate a menu which is the switch destination of the menu switch (F12 key), add "Number of menu switches x 10".
For the menu No. of a Customization screen, designate the menu key No.
Standard HMI screen
Menu No. = Number of menu switches x 10 + Position from the left end of menu (1 to 10)
Customization screen
Menu No. = Menu key No. (1 to 10)
When a menu is not designated, designate "0".
When "0" is designated to the main menu No., the sub menu No. is treated as "0".
Note
(1) The menu No. is always designated from the first page.
(2) When the third page is designated to the menu there are only two pages (ex. 21), the first page is a target menu page
because of switching the menu twice.
(3) On the Customization screen, menu changeover cannot be designated.
The designated menu key is notified as a key event (KeyPress/KeyRelease event).
Menu No. Key code to be notified
1 GK_F1
2 GK_F2
3 GK_F3
4 GK_F4
5 GK_F5
IB-1501668-B
Value of R358
Main menu
(0 to 30)
Screen No.
(0 and 6000 to 7999)
Menu No.
6
7
8
9
10
878
Value of R359
Window No.
of the Customization screen
(8000 to 9999) (*2)
Window No.
(0, 6000 to 9999)
Key code to be notified
GK_F6
GK_F7
GK_F8
GK_F9
GK_F10