M800V/M80V Series PLC Programming Manual (1/2)
7 Basic Instructions
7.6 Other Instructions
7.6 Other Instructions
NOP, NOPLF, PAGE n: No operation
Setting
Bit device
data
X
Y
M
L
F
n
[Instruction symbol] [Execution condition]
NOP
NOPLF
PAGE n
Functions
NOP
Since this is the instruction that does not involve processing, it has no effect on the operations up to that point.
The NOP instruction is used in the following cases:
- To insert space for sequence program debugging.
- To delete an instruction without having to change the number of steps. (Replace the instruction with NOP)
- To temporarily delete an instruction.
NOPLF
Since this is the instruction that does not involve processing, it has no effect on the operations up to that point.
The NOPLF instruction is used when printing from a peripheral device to force a page change at any desired location.
(a) When printing ladders
- A page break will be inserted between ladder blocks with the presence of the NOPLF instruction.
- The ladder cannot be displayed correctly if an NOPLF instruction is inserted in the midst of a ladder block.
Do not insert an NOPLF instruction in the midst of a ladder block.
(b) When printing instruction lists
- The page will be changed after the printing of the NOPLF instruction.
See the Operating Manual for the peripheral device in use for more information regarding printouts from peripheral devices.
Usable devices
B SB
T SM V
T
C
Con-
Word device
stant
D
R/ZR W SW SD
Z
K
○
*NOP is not displayed in ladder display.
NOP
155
Digit
Pointer
designa-
Index
tion
H
P
NOPLF
PAGE n
IB-1501667-B