Edge Relay V - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (1/2)
4 Explanation of Devices
4.4 Detailed Explanation of Devices

4.4.6 Edge Relay V

Edge Relay V
 This stores the operation result (ON/OFF information) from the head of ladder block.
 This can be used only at contacts. This cannot be used as a coil.
V1
X0 X1 X10
 The relay No. is expressed with a decimal.
Edge relay
Operation results of X0,X1 and X10
are stored.
39 IB-1501667-B