Mitsubishi Electric M800VW Series Programming Manual page 29

M800V/M80V Series PLC Programming Manual (1/2)
2 PLC Processing Program
2.3 PLC Processing Program Level and Operation
The following is the example of the built-in PLC (built-in edit function) setting screen.
Set the project execution order in a way that does not to have the duplication of the number in the setting range from 1 to 6,
regardless of the usable project number. The project starts up from the smaller setting number in numerical order.
The execution order shown here is the case when 3 projects are registered to CNC as in the setting screen above.
[The operation time chart of PLC processing program]
When the standard interruption signal is 3.5 ms
Standard
interruption signal
Project 1 High-speed
processing
Project 2 High-speed
processing
Project 3 High-speed
processing
Project 1 Main
processing
Project 2 Main
processing
Project 3 Main
processing
NC processing
IB-1501667-B
3.5 ms
8