Acx6160 Installation Safety Guidelines - Juniper ACX6160 Hardware Manual

ACX6160 Installation Safety Guidelines

IN THIS SECTION
General Installation Safety Guidelines | 48
ACX6160 Chassis Lifting Guidelines | 48
Observe the following guidelines before and during ACX6160 installation:
General Installation Safety Guidelines
Before installing or moving the ACX6160, verify that the intended site meets the specified power,
environmental, and clearance requirements. See the following documentation:
• "ACX6160 Site Preparation Checklist" on page 25
• "ACX6160 Clearance Requirements for Airflow and Hardware Maintenance" on page 30
• "ACX6160 Rack Requirements" on page 32
• "ACX6160 Cabinet Requirements" on page 34
• "ACX6160 Environmental Requirements and Specifications" on page 27
• "ACX6160 DC Power Specifications" on page 21
ACX6160 Chassis Lifting Guidelines
The weight of a fully-loaded ACX6160 is approximately 24 lb (10.89 kg). Observe the following
guidelines for lifting and moving an ACX6160:
CAUTION: If you are installing the ACX6160 above 60 in. (152.4 cm) from the floor,
remove the power supplies, fan modules, and any expansion modules before attempting
to install the device, or ask someone to assist you during the installation.
• Before installing the ACX6160, read the guidelines in
25 to verify that the intended site meets the specified power, environmental, and clearance
requirements.
• Before lifting or moving the ACX6160, disconnect all external cables.
"ACX6160 Site Preparation Checklist" on page
48