Installation Safety Guidelines And Warnings; M7I Chassis Lifting Guidelines; Installation Safety Warnings For Juniper Networks Devices - Juniper M7i Hardware Manual

CHAPTER 35
Installation Safety Guidelines and
Warnings

M7i Chassis Lifting Guidelines

Related
Documentation

Installation Safety Warnings for Juniper Networks Devices

Copyright © 2019, Juniper Networks, Inc.
M7i Chassis Lifting Guidelines on page 233
Installation Safety Warnings for Juniper Networks Devices on page 233
The weight of a fully configured chassis is about 36.5 lb (16.6 kg). Observe the following
guidelines for lifting and moving the router:
Before moving the router, read the guidelines in
on page 73 to verify that the intended site meets the specified power, environmental,
and clearance requirements.
If a lift cannot be used, one person can lift the router. Another person is required install
the mounting screws.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Installation Safety Warnings for Juniper Networks Devices on page 233
Observe the following warnings before and during hardware equipment installation:
Intrabuilding Ports Warning on page 234
Installation Instructions Warning on page 234
Rack-Mounting Requirements and Warnings on page 234
Ramp Warning on page 238
"M7i Router Site Preparation Checklist"
233