Installation Safety Guidelines And Warnings; T320 Installation Safety Guidelines; General Installation Safety Guidelines; Chassis Lifting Guidelines - Juniper Core Router T Series Hardware Manual
Hide thumbs
Also See for Core Router T Series:
- Monitoring and troubleshooting manual (812 pages) ,
- Handling instructions manual (12 pages)
Table of Contents
Advertisement
CHAPTER 38
Installation Safety Guidelines and
Warnings
T320 Installation Safety Guidelines
General Installation Safety Guidelines
Chassis Lifting Guidelines
Copyright © 2018, Juniper Networks, Inc.
T320 Installation Safety Guidelines on page 335
Installation Safety Warnings for Juniper Networks Devices on page 336
General Installation Safety Guidelines on page 335
Chassis Lifting Guidelines on page 335
Before installing the router, verify that the intended site meets the specified power,
environmental, and clearance requirements.
T320 Clearance Requirements for Airflow and Hardware Maintenance on page 91
T320 Rack Requirements on page 90
T320 Environmental Specifications on page 93
T320 DC Power Distribution on page 98
T320 Power Requirements on page 96
T320 Power System Electrical Specifications on page 96
The weight of a fully configured T320 chassis is up to 370 lb (168 kg). Observe the
following guidelines for lifting and moving the router:
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to
maneuver the router into a rack is recommended.
If a mechanical lift cannot be used, a minimum of three people are required to lift the
router, and you must remove components from the chassis before lifting.
335
Advertisement
Table of Contents
Troubleshooting
