Less Than Or Equal To Command For String Processing; Greater Than Or Equal To Command For String Processing - HEIDENHAIN TNC 426 PB/M Technical Manual

7.9.8 LESS THAN OR EQUAL TO COMMAND FOR STRING PROCESSING (<=)
7.9.9 GREATER THAN OR EQUAL TO COMMAND FOR STRING PROCESSING (>=)
December 2001
Syntax: <= (LESS EQUAL)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is less than or equal to the operand, the
condition is true and the TNC sets the logic accumulator to 1. If the string
accumulator is greater than the operand, it sets the logic accumulator to 0.
Example:
See command <>.
Syntax: >= (GREATER EQUAL)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is greater than or equal to the operand, the
condition is true and the TNC sets the logic accumulator to 1. If the string
accumulator is less than the operand, it sets the logic accumulator to 0.
Example:
See command <>.
Commands for String Processing 7 – 155