Equal To Command For String Processing (==); Less Than Command For String Processing; Greater Than Command For String Processing - HEIDENHAIN TNC 426 PB/M Technical Manual

7.9.5 EQUAL TO COMMAND FOR STRING PROCESSING (==)

7.9.6 LESS THAN COMMAND FOR STRING PROCESSING (<)
7.9.7 GREATER THAN COMMAND FOR STRING PROCESSING (>)
7 – 154
Syntax: == (EQUAL)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator and the operand are equal, the condition
is true and the TNC sets the logic accumulator to 1. If they are not equal, the
TNC sets the logic accumulator is set to 0.
Example:
See command <>.
Syntax: < (LESS THAN)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is less than the operand, the condition is
true and the TNC sets the logic accumulator to 1. If the string accumulator is
greater than or equal to the operand, it sets the logic accumulator to 0.
Example:
See command <>.
Syntax: > (GREATER THAN)
Operands: S <arg>
Action:
This command sets off a direct transition from string to logical processing.
Compare the content of the string accumulator with the string in the
argument. If the string accumulator is greater than the operand, the condition
is true and the TNC sets the logic accumulator to 1. If the string accumulator
is less than or equal to the operand, it sets the logic accumulator to 0.
Example:
See command <>.
HEIDENHAIN Technical Manual TNC 426, TNC 430