Configuring The Policy Name; Configuring A Policy Term - Juniper J2300 User Manual

Configuring the Policy Name

Each routing policy is identified by a policy name. The name can contain letters,
numbers, and hyphens (-) and can be up to 255 characters long. To include spaces
in the name, enclose the entire name in double quotation marks.
Each routing policy name must be unique within a configuration.
To configure the policy name:
1.
2.
3.
Table 143: Configuring the Policy Name
Task
Navigate to the Policy statement level
in the configuration hierarchy.
Enter the policy name.
Apply your configuration changes.

Configuring a Policy Term

Each routing policy term is identified by a term name. The name can contain
letters, numbers, and hyphens (-) and can be up to 255 characters long. To include
spaces in the name, enclose the entire name in double quotation marks.
To configure a policy term:
1.
2.
3.
4.
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 143.
Go on to "Configuring a Policy Term" on page 377.
J-Web Configuration Editor
In the J-Web configuration editor
hierarchy, select Policy options>Policy
statement.
In the Policy name box, type the name
of the policy.
Click OK to apply your entries to the
configuration.
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 144.
If you are finished configuring the policy, commit the configuration.
Go on to one of the following procedures:
Configuring a Routing Policy with a Configuration Editor
Configuring Routing Policies
CLI Configuration Editor
From the top of the CLI configuration
hierarchy, enter
edit policy-options
Type the policy-name value. For
example:
set policy-statement policy1
Changes in the CLI are applied
automatically when you execute the set
command.
377