Tracing Igmp Protocol Traffic - Juniper ACX1000 Configuration Manual

Release History Table
Related
Documentation

Tracing IGMP Protocol Traffic

Copyright © 2017, Juniper Networks, Inc.
Release Description
12.2 Starting in Junos OS Release 12.2, you can optionally configure a system log
warning threshold for IGMP multicast group joins received on the logical
interface.
Enabling IGMP Static Group Membership on page 459
Tracing operations record detailed messages about the operation of routing protocols,
such as the various types of routing protocol packets sent and received, and routing policy
actions. You can specify which trace operations are logged by including specific tracing
flags. The following table describes the flags that you can include.
Flag
all
client-notification
general
group
host-notification
leave
mtrace
normal
packets
policy
query
report
route
state
task
Chapter 14: Configuring Internet Group Management Protocol
Description
Trace all operations.
Trace notifications.
Trace general flow.
Trace group operations.
Trace host notifications.
Trace leave group messages (IGMPv2 only).
Trace mtrace packets. Use the
troubleshoot the software.
Trace normal events.
Trace all IGMP packets.
Trace policy processing.
Trace IGMP membership query messages, including
general and group-specific queries.
Trace membership report messages.
Trace routing information.
Trace state transitions.
Trace task processing.
command to
mtrace
469