Honda Prelude 1993 Service Manual page 1389

Hide thumbs Also See for Prelude 1993:

Table of Contents

Supplemental Restraint System (SRS)

Troubleshooting (66n1'd1

Disconnect the cable reel 6-P connector from the

SRS main harness. then connect Test Harness C

(O7LAZ-SL4O300I only to the cable reel side of

the connector.

5. Measure the resistance between the No. 4 terminal

and the No. 5 terminal.

TEST HARI{ESS C

oTLAZ - S1403{tO

lf resistance is more than 0.2 KO, 9o to step 6.

lf resistance is less than O.2 KO, the SRS main

harness is taulty. Replace it and recheck the

voltages according to the chart on page 23-30'4,

Disconnect the d.iver's airbag 3-P connector trom

the cable reel harness, then connect Test Harness

C {O7LAZ-SL4O30O) to the driver's airbag 3-P

Measure the .esistance between the No. 7 terminal

and the No. I terminal.

TEST HAB'{ESS C

oTr.Aiz - st4{t3dt

a lf resistance is more than O.2 KO, the drive.'s

airbag intlator is faulty. Replace the airbag

assembly and recheck the voltages according to

the chart on page 23-304.

a lf resistance is less than 0.2 KO, the cable resl is

faulty. Replace it 8nd .echeck the voltages ac-

cording to the chart on page 23-304.

Troubleshooting