Honda Prelude 1993 Service Manual page 1163

Hide thumbs Also See for Prelude 1993:

Table of Contents

Starting System

Armature lnspection and Test

1. Inspect the armature surface for wear or damage.

A dirty or burnt commutator suriace may De resur-

faced with emery cloth or a lathe within the tollow-

ing specificstions.

Commutator Diametot

Standard (Newl: 28.0-28.1 mm

{ 1 . 1 O 2 - 1 . 1 O 6 i n l

Soruice Limit

;27.5 mm (1.O8 inr

VEBNIER CALIPER

Commutator Runout

Standard {Now}; 0-0.02 mm {0-0.0008 in)

Ssrvics Limit

: 0.O5 mm (0.002 inl

lf the commutator runout and diamet€r are within

limits, check the commutator for damage or tor car-

bon dust or brass chips between the segments.

It the suriace is dirty, recondition it with a #SOO or

#600 sandpap€r. Then, check mica deDth. ll

necessary, undercut the mica with a hacksaw

blad6 to achieve proper depth.

Commutator Mica D€pth

S t a n d a r d ( N e w l : 0 . 4 - O . 5 m m ( 0 . 0 1 6 - 0 . 0 2 0 i n )

Service Limit

: 0.15 mm {0.006 in}

Troubleshooting