-t
Trunk Light and Latch Switch
Trunk Light Test/Replacement
Pry ofl the trunk light lens from the housing.
Pry out the light.
BULA (3.4 Wl
4.
Make sure that the bulb is oK
Check for continuity between A (+) and B (-)
terminals.
NOTE: This light has a diode in it. To get an ac-
curate reading, either test it with a volt-ohmmeter
that comDensatas tor diodes, or make sure you
connect vour t€st leads to match the polarity
snown.
Latch Switch Test/Replacement
Open the trunk lid and disconnect the 2-P connec-
tor from the trunk latch.
Check continuity between terminsls A and B. There
should be continuity.
lJ necessary, remove the three bolts and pull the
latch ou1 ot the trunk lid, then disconnect tho lock
rod from the latch,
Disconnect the trunk opener cable from the latch.
a
4 .
{3.4W1
From
rr*r ffi
FUSE
Disconnect the 2-P connector from the housing.
LENS
23-189