Honda Prelude 1993 Service Manual page 1221

Brake System Light
Parking Brake Switch Test
Remove the floor console and disconnect the con-
nectof from the switch.
Check continuity between the positive terminal and
body ground.
a There should be continuitY with the brake lever
u o .
a There should be no continuity with the brske
lever down.
Canads:
NOTE: lf the parking brake switch is OK, but the brake
system light does not work, perform the input test for
the daytime running lights control unit {see page
2 3 - 1 8 0 ) .
Brake Fluid Level Switch Test
Remove the reservoir cap. Check that the float
moves up and down freely; if it doesn't, replace the
reservoir cap assemblY.
Check Jor continuity between the terminals with
the tloat uD and down,
a There should be continuity with the float down
a There should be no continuitv with the float up
Replace the resetvoir cap assembly if necessary.
RESERVOIR CAP
when float drops.
UP POSIIION
Switch contacts open, at
proper fluid level.
BRAKE LEVER
l H a s
a b l i l t - i n
]
\ magner
l
DOWN POSITION
contacts closed
23-143