Side Marker/Turn Signal/Hazard
Hazard Warning Switch Replacement
Flasher System
Hazard Warning Switch Test
1 .
2 .
Remove the hazard warning switch from the center
console panel.
Check for continuity between the terminals in each
switch position according to the table,
\
Te.minal
il----\
E
ON
o-
/1
-o o-
t_r_
-o
-o
\:,/
OFF
CAUTION: Be careful not to damage the console
pan€ls.
1. Remove the front console panel (see section 20).
2. Remove the screw and turn the hazard warning
switch slowly in the direction shown and remove it
from the center console.
3. Disconnect the 6-P connector from the switch.
CENTER CONSOLE
6.P CONNECTOR
23-200