Honda Prelude 1993 Service Manual page 1256

Lighting System
Combination Light Switch Test
CAUTION:
a All SRS electrical wiring halnessos ara covered with
yollow out€r insulation.
a Bofore disconnocting tho SRS wilo harnoss, install
th€ sho.t connector on th6 ai1b8g {se€ paga 23-2941,
a Roplace tho entire aftected SRS harno$ assembly it
it has an opon circuit or damagod widng.
NOTE: The radio may have a coded theft Drotection cir-
cuit. Be sure to get the customer's code number betore
- Oisconnecting the battery.
- Removing the No. 43 (1O A) fuse.
(ln the under-hood tuse/relay box)
- Removing the radio.
After service, reconnect power to the radio and turn it
on. When the word "CODE" is displayed, enter the
customer's 5-digit code to restore radio operation.
1. Remove the dashboard lower cover and knee
bolster.
2.
Disconnect the connectors from the main wire
narness.
3. Inspect the connector terminals to be sure they are
all making good contact.
a lf the terminals are bent, loose. or corroded,
repair them as necessary, and recheck the
sysrem.
a lf the terminals look OK, check for continuity
between them in each switch position according
to the tabl6s.
2O-P CONNECTOR
5.P CONNECTOR
DAHSBOARD LOWER COVEF
View from wire side
SRS MAIN HARNESS
23-178
KNEE BOLSTER
View trom wire side