Honda Prelude 1993 Service Manual page 1153

lgnition Switch
Electrical Switch Replacement
CAUTION:
a All SRS €lectlical wiring harnossrr are covorod with
yollow outor insulation.
a Boforo disconnocting the SRS wir6 h.mo$, install th€
shon connoctor on the airbag{sl (3oo pag6 23-2941.
a Replace the entilo affactod SRS hEmoss a$ombly it
it has an open circuit or damagsd wiring.
NOTE: The radio may have a coded thett protection cir-
cuit. Be sure to get the customer's code number before
- Disconnecting the battery.
- Removing the No. 43 (1O Al fuse.
{ln the under-hood fuse/relay box)
- Removing the radio.
After se.vice, reconnect power tO the radio and turn it On.
When the word "CODE" is displayed, enter the cus-
tomer's 5-digit code to restore radio operation.
SRS MAIN HARNESS
'1. Remove
the dashboard lowsr cover and let't knee
bolster.
2. Remove the steering column covers.
UPPER COLUMN COVER
3. Disconnect the 5-P connector Jrom the under-dash
fuse/relav box and disconnect the 3-P connector
from the main wir€ harness.
3.P CONNECTOR
(Main wiro harness sid6l
3-P COl{ ECTOR
Insert the key and turn it to "O",
Removs thg cover screw and ths cover.
R€move the two mounting scrsws and replaco the
switch.
4.
MOUI{TING SCREWS
23-74