Honda Prelude 1993 Service Manual page 1388

Connect Test Harness D (07LAZ-SL404OO) be-
tween the dash sensor and SRS main harness 2-P
connecror.
Check the resistance between the No' 1 terminal
and No. 2 terminal.
TEST HARI{ESS D
07LAZ - 5140400
lf resistance is more than 5 K0. the dash sensor
is faulty. Replace it and recheck the voltages ac-
cording to the chart on page 23-304.
It resistance is less than 5 KO, the SRS main
harness is taulty. Replace the SRS main harness
and recheck the voltages according to the chatt
on page 23-304.
r l
- -
-
'
4 .
'!
Mode E: Open in drivsr's airbag inflator or cable re6l.
NOTE: The radio may have a s-digit coded thelt pro-
tection circuit. Be sure to get the customer's code
number betore disconnecting the battery cables.
1. Before disconnecting any part of the SRS wire
harness, the positive cable. Install the short con-
nector(s) (RED) on the airbsg(s) (see page 23-294).
2. Connect Test Harness B (O7MAZ-SP005OO) be-
tween the SRS unit and SRS main harness 18-P
connector.
TEST }IARNESS B
oTMAZ-SP00500
Reconnect the driver's airbag connector, then
check the resistance between the B1 and the 87
terminals.
TEST HARI{ESS B
oTMAZ - SmO500
lf resistance is more than O.2 KO, go to step 4.
lf resistance is less than O.2 KO. the SRS unit is
faulty. Substitute a known-good SRS unit and
recheck the voltages according to the chan on
page 23-3O4.
(cont'd)
a
a
23-311