Honda Prelude 1993 Service Manual page 1406

CAUTION:
a Bg sure to install the harness wil€s go thoy ar€
not Dinch€d 01 intorfering with oth6r cal parts.
a Carefully inspect the new dash sonsol(sl for
signs of being dropped or imploperly handl6d,
such as dents, cracks or deformation.
a Fol the SRS to function proporly, the dghl and
lett sansors must b€ install€d on the propor
sidos.
Install the sensor securelY.
DASH SENSOR
MOUNTING EOLTS
8 t 1 . 2 5 m m
22 N'm t2.2 kg-m. 16 lb-ft)
RePlace
7.
Reinstall all other removed parts.
o .
DASH SENSOR
8 .
Remove and properly store the short connector(sl
(RED), then reconnect to aitbag connector(s) {and
reinstall the glove boxl.
Reconnect the battery positive cable, then the
negative cable.
After installing the dash sensor, confirm proper
system operation: Turn the ignition ON (ll); the in-
strument panel sRS indicatot light should go on for
about six seconds and then go off
Enter the code number to restore radio operation
(see page 23-206).
9 .
1 0 .
'l 'l .
23-329