Belt Adjustment - Honda Prelude 1993 Service Manual

Belt Adjustment
1 .
Apply a torce of 100 N (10 kg, 22 lbs) and measure
rhe deflection between the alternator and crankshaft
DUIeY.
Comp.6so. Beh
Moction:
U.cd Eolt: 10.0 - 12.0 mm 10.39 - 0.,17 in)
N.w B€h: 4.5 - 7.0 mm (0.18 - 0.28 in)
P/S Pump Belt
Usod Bolt: 13.5 - 16.5 mm (0.53 - 0.65 in)
Now Bslt: 9.5 - 11.5 mm (0.37 - 0.,15 in)
NOTE:
. lf there are cracks or any damage evident on the
belt, replace it with a new one.
.
"Used belt" means a belt which has been used
for five minutes or more.
.
"New belt" means a belt which has been used
for less than five minutes.
THROUGH BOLT
45 N.m 1,1.5 kg-m, 33 lb-ft)
A/C COMPRESSOR
Measure with Belt Tension Gauge:
Attach the belt tension gauge to the belt and mea-
sure the tension of the belt.
Compresgor Bglt
Tension:
Used Bsh: 450 - 600 N {i[5 - 60 kg,99 - 132 lbs]
New Belt: 950 - 1t5O N
{95 - 115 kg, 2Og - 254 lbs)
P/S B€lt
Used Beh: 350 - 500 N {35 - 50 kg, 77 - 110 lbs}
Nsw Eolt: 700 - 900 N (70 - 90 kg, t5'l - 198 lbs)
NOTE:
. lf there are cracks or any damage evident on the
belt, replace it with a new one.
a See the instructions for the tension gauge.
BELT TENSION GAUGE
07JGG - (x)l010A
THBOUGH AOLT
il5 N.m {i1.5 kg-m, 33 lb-ft)
\
CRANKSHAFT
PULI-EY
ADJUSTMENT
LOCKNUT
2 .
3.
22 N.m {2.2 kg-m, 16lb-ft|
Loosen the through bolt and alternator n"t.
Turn the adjusting bolt to obtain the proper belt ten-
s i o n , t h e n r e t i g h t e n t h e a d j u s t m e n t l o c k n u t a n d
through bolt.
Recheck the deflection of the belt.