Honda Prelude 1993 Service Manual page 1397

Supplemental Restraint System (SRSI
Airbag Assembly Replacement (cont,dl
CAUTIOI{: B€ sura to installthe SRS wi ng so thst it ie
nol pinchod or intorforing with oth6r car parts.
4.
Install the new airbag(s).
Driver's Side: Place the driver's airbag assembly in
the steering wheel. and secure it with new TORX@
bolts.
OBIVEB'S
AIRBAG
10 N.m {1.O kg-m, 7.2 tb-ft)
Reolace.
U8o 6 TOBX@ T3O bit
TORXO BOLT
Front Passenger's Side:
a Place the front passenger's airbag assembly in
the dashboard.
a Loosen the two mounting nuts on the L-bracket.
a P.ess the airbag assembly downwards and turn
the adjusting nuts until they touch the lower
part of the airbag assembly.
a Tighten the four airbag mounting nuts, then
tighten the two mounting nuts on the L-bracket.
ADJUSTING
NUT
L-BRACKET
L-BRACKET
MOUNTING NUT
10 N.m 11.0 kg-m, 7.2 lb-ftl
Replace.
ASSEMBLY
MOUNTING NUTS
10 N.m (1.0 kg-m, 7.2 tb-frl
Replace.
23-320