Honda Prelude 1993 Service Manual page 1304

Gigarette Lighter
Replacement
CAUTIO :
a All SRS olsctdcal widng hamesses arc covsrsd with
y6llow outer insulation.
a Boloro disconnecting the SRS wire hamess. install
iha short connector(s) on tho airbag(s) (see page
23-2941.
a Replaca tho ontira affoctod SRS harness arsombly if
it has an open circuh or damaged wiring.
NOTE; The radio may have 8 coded theft protection cir-
cuit. Be sure to get the customer's code number before
- Disconnecting the battery.
- Removing the No. 43 (10 A) fuse.
(ln the under-hood fuse/.elay box)
- Removing the radio.
After service, reconnect power to the radio and turn it
o n .
When the word "CODE" is displayed, enter the
customer's 5-digit code to restore radio opgration.
3. Disconnect the thermofuse
socket.
housing flom the
CIGARETTE
LIGHTER
4 .
Remove the ring nut and s€parate the cigar6tta
lighter socket trom the th€rmal protector.
Wh6n installing the cigarette lighter, align €ach lug
on th€ face pansl, illuminstion ring, and cigarette
lighter socket with the groove in the hole, then
position the bulb housing on ths thermal protector
hw66n
ths stops in the radio panel,
Mak€ sure that the ground wire, bulb sock6t, and
thermofuse housing are sested against the
cigar€tte lightsr assembly.
6 .
l.
Remove the front console {see section 2O}.
Remove the radio panel assembly (see
23-210t.
page
UGHT {1.4 W
SRS MAII{ HARI{ESS
23-226