Honda Prelude 1993 Service Manual page 1392

Modo H: Short or opsn SRs indicator wiro harnosa.
NOTE: The radio maY have a 5-digit coded theJl pro-
tection circuit. Be sure to get the customel's code
number beJore disconnecting ths battery cables.
1. Disconnsct the SRS main harness 4-P connector
from the main wire harness.
2 .
Turn the ignition switch ON and wait for six
s€conds. Measule the voltage between the No' 1
terminal 8nd body ground on the SRS main harness
4-P connector side.
a lf voltage is mote than 8.5 V, go to step 8'
a ll voltage is less than 8.5 V, go to step 3
SRS MAII{ HARI{ESS
4 - P CONf{ECTOR
F-"------
F-i-rl
/JLILx l-. ,\
' l
BLU
-t
ap
t_
View from terminsl side.
23-315
?
4 .
BeJore disconnecting any pan of the SRS wire
harness, installthe short connector(s) (RED) on the
airbag(s) (see page 23-2941.
Connect Test Harness B (O7MAZ-SPOO5OO) be-
tween the SRS unit and SRS main harness 18-P
connecror.
oTMAZ_SP00500
Reconnect the battery positive cable and negative
cable.
Check for continuity between the B1 1 terminal and
body ground,
TEST HARI{ESS B
oTMAZ - SP(xrs(x)
a lf there is continuitv, the SRS main harness is
shoned. Replace the SRS main harness and
recheck ths voltages according to the chart on
page 23-3O4.
a lf th€re is no continuity, go to step 7.
o .