Honda Prelude 1993 Service Manual page 1395

Supplemental Restraint System (SRSI
Airbag Assembly Replacement
E@
sro.e a rsmoved airbag assembty with the
pad surlace up. lf tho airbag is improp€rly stored face
down, accidental d€ployment could plopel th€ unit with
€nough lotce to cause satious iniury.
CAUTION:
a Do not install used SRS parts f.om another cat.
Wh€n repailing as SRS, use only n€w parts.
o Carelully inspect ths airbag assembly before you in_
stall it. Do not install an airbag assembly that shows
signs of being droppad or improperly handled, such
as dents, cracks or dolotmation.
a Always ke€p tho short conn€ctor(sl (REDI on the air_
bag{s) whan th6 harness is disconnoctod.
a Do not disasaombls ()1 tamper with the airbag
ass€mbly.
NOTE: The radio may have a s-digit coded theft pro-
tection circuit, Be sure to get the customer's code
number before disconnecting the battery cables.
l. Disconnect the battery negative cable, then
disconnect the positive cable.
2. Install the short connector(s) (REDI on the airbaq
side of the connector(s):
Oriver's Side:
a Remove the access panel from the steering
wheel, then remove the shon connecto. {RED)
trom the panel.
a Disconnect the 3-P connector between the
driver's airbag and cable feel, then insta the
short connector (RED) on the airbag side of the
connector.
CABLE R€EL 3.P CONNECTOR
DRIVER'S
AIRBAG
3-P CONNECTOR
SHORT
CONNECTOR
{RED}
23-318
ACCESS PANEL
Front Passenger's Side:
a Remove the glove box, then remove the short
connector {RED) from its holder
a Disconnect the 3-P connector between the front
passenger's airbag and SRS main harness. then
install the short connector (RED) on the airbag
side of the connector.
FRONT PASSENGER'S
AIRBAG
3.P CONNECTOR
GLOVE BOX