Configuring Optional Settings
Configuring Optional Settings
This section describes optional commands that can be used within the Bulk Statistics Configuration mode.
Specifically, you can configure bulk statistic "files" under which to group the bulk statistics. "Files" are used
to group bulk statistic schema, delivery options, and receiver configuration. Because multiple "files" can be
configured, this functionality provides greater flexibility because it allows you to configure different schemas
to go to different receivers.
configure
bulkstats mode
bulkstats collection
end
Configuring Bulk Statistic Schemas
In each configuration example described in
Optional Settings, on page
and the statistics collected:
configure
bulkstats mode
Refer to the Bulk Statistics Configuration Mode Commands and Bulk Statistics File Configuration Mode
Commands chapters in the Command Line Interface Reference for more information regarding supported
schemas, available statistics, and proper command syntax.
Using show bulkstats Commands
There are several Exec mode show bulkstats commands that display information about defined parameters.
• show bulkstats data – displays criteria contained in the statistics gathering scheme for up to four files.
• show bulkstats schemas – displays the scheme used to gather statistics including collection and
ASR 5500 System Administration Guide, StarOS Release 19
116
file number
receiver ip_address
primary
{
mechanism
ftp
[
{ { {
password pwd
encrypted
[
]
receiver mode { redundant | secondary-on-failure }
remotefile format naming_convention [ both-receivers | primary-receiver | secondary-receiver ]
header format header_format
footer format footer_format
exit
schema_type schema format format_string
sample-interval time_interval
transfer-interval xmit_time_interval
limit mem_limit
exit
116, the following is the primary command used to configure the type of schema
schema_type schema format format_string
See
Viewing Collected Bulk Statistics Data, on page
transmission statistics. See
secondary
|
}
sftp
login user_name
|
}
tftp
} |
} } ] }
Configuring Standard Settings, on page 115
118.
Verifying Your Configuration, on page
Bulk Statistics
and
Configuring
117.