Toyota T100 1996 Service Manual page 377

INSPECTION PROCEDURE
1 Check voltage between terminal BATT of ECM connector and body ground.
LOCK
For M/T
For A/T
AB0117
P24216
P24217
NG
2 Check EFI fuse.
EFI Fuse
R/B No.2
OK
Check and repair harness or connector be-
tween battery, EFI fuse and ECM.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS
PREPARATION:
Remove the right cowl side trim (See page MF−50).
CHECK:
Measure voltage between terminal BATT of ECM connector
BATT (+)
and body ground.
OK:
BATT (+)
OK
A00090
PREPARATION:
Remove the EFI fuse from the R/B No2.
CHECK:
Check continuity of EFI fuse.
OK:
NG
FI7107
− ENGINE (3RZ−FE)
Voltage: 9 − 14 V
Check and replace ECM (See page IN−26).
Continuity
Check for short in all the harness and compo-
nents connected to EFI fuse.
DI−113