Polycom RMX 1500 Administrator's Manual page 515

Multipoint control unit
Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Polycom, Inc.
Table 19-4
Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag and Value
PCM_LANGUAGE
QOS_IP_AUDIO
QOS_IP_VIDEO
REDIAL_INTERVAL_IN_SEC
ONDS
RMX_MANAGEMENT_SEC
URITY_PROTOCOL
SIP_AUTO_SUFFIX_EXTEN
SION
SIP_ENABLE_FECC
SIP_FAST_UPDATE_INTER
VAL_ENV
Description
Determines the language of the PCM interface.
Possible Values are: ENGLISH, CHINESE_SIMPLIFIED,
CHINESE_TRADITIONAL, JAPANESE, GERMAN, FRENCH,
SPANISH, KOREAN, PORTUGUESE, ITALIAN, RUSSIAN,
NORWEGIAN
Default: Current RMX Web Client language.
Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
Enter the number of seconds that the RMX should wait before
successive re dialing attempts.
Range: 0-30 (Default: 10)
Enter the protocol to be used for secure communications.
Default: TLSV1_SSLV3 (both).
Default for U.S. Federal licenses: TLSV1.
Used to automatically add a suffix to a SIP address (To
Address) instead of adding it manually in the RMX Web Client
(SIP address) when the SIP call is direct-dial and not through
a Proxy.
Example:
Participant Name = john.smith
Company Domain = maincorp.com
SIP_AUTO_SUFFIX_EXTENSION flag value =
@maincorp.com
Entering john.smith will generate a SIP URI =
john.smith@maincorp.com
By default, FECC support for SIP endpoints is enabled at the
MCU level. You can disable it by manually adding this flag and
setting it to NO.
Default setting is 0 to prevent the RMX from automatically
sending an Intra request to all SIP endpoints.
Enter n (where n is any number of seconds other than 0) to let
the RMX automatically send an Intra request to all SIP
endpoints every n seconds.
It is recommended to set the flag to 0 and modify the
frequency in which the request is sent at the endpoint level
(as defined in the next flag).
Chapter 19-RMX Administration and Utilities
19-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents