Cisco Equipment; Polycom Equipment - Polycom RMX 1500 Administrator's Manual

Multipoint control unit
Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Cisco Equipment

To configure the various Cisco entities the following procedures are required.
CUCM
1
IOS Gatekeeper
>> Set up zones and gateway type prefixes to enable dialing to DMA and RMX systems.
IOS and CMA Gatekeepers (Neighbored)
>> Configure the Cisco IOS Gatekeeper for two separate zones.

Polycom Equipment

Table 11 lists the Polycom products supported within the various Deployment Architecture.
Only RMX configurations are described in detail in this document.
Configuration procedures for all other solution components are described in the Polycom
Unified Communications Deployment Guide for Cisco Environments. .
Table 11
Polycom TIP and SIP
Polycom DMA 7000 system
Polycom RMX 2000 and 4000 systems
Immersive Telepresence Systems:
Polycom, Inc.
For more information see "Procedure 4: Configuring a TIP Enabled Profile on the RMX"
on page I-19.
Configure the CUCM to send and receive calls from the H.323 network.
With Neighbored IOS and CMA Gatekeepers
a
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
With CMA Gatekeeper
b
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
With IOS Gatekeeper
c
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, "Configuring the Cisco IOS Gatekeeper ".
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, "Configure the Cisco IOS Gatekeeper for use with a CMA System".
supported current Polycom products
RPX 200 and 400 systems
OTX 300 system
TPX HD 306 system
ATX HD 300 system
Appendix I-RMX and Cisco Telepresence Systems (CTS) Integration
Version(s)
V4.0
V7.6
MPMx card rARE equired.
V3.0.3
Requires TIP option key.
Requires Polycom Touch Control.
I-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents