Polycom RMX 1500 Administrator's Manual page 624

Polycom RMX 1500/2000/4000 Administrator's Guide
6.
7
8
9
10 When the Test are completed, you have the option to download a report in Excel format
11 The Diagnostics Mode can be exited by pressing the red System Reset icon.
12 The RMX then resets.
20-28
The Diagnostics Summary pane is displayed at the bottom of the Hardware Monitoring
pane.
Figure 20-1RMX 2000/4000 Diagnostics Tests & Monitoring Tests
Figure 20-2RMX 1500 Diagnostics Tests & Monitoring Tests
Select the Run all Tests box and then click Run Selected Tests.
Table 20-19 Tests Selection - Additional Test Parameters
Parameter
Loop Test
Stop On Failure
Run All Test
The selected tests are initialized. In the Tests Monitoring pane there is an indication of
the Status of the Tests.
This process may take some time. Click Stop Running Test to end all the diagnostic tests.
The MCU completes the current test running and then stops all remaining tests.
for analysis by your next level of support by clicking the Export Diagnostics Result
button.
Description
Enter the amount of times the test is to repeat itself in succession.
Stops tests upon a failure.
Runs all tests listed in the TestActive column for the hardware
component.
Polycom, Inc.