Polycom RMX 1500 Administrator's Manual page 561

11 Click the Add button to add a new Manager terminal.
12 Type the IP Address and the Community name of the manager terminal used to
13 Click the Security tab.
Polycom, Inc.
Table 19-20 SNMPv3 - Traps (Continued)
Field
Trap Destination
The New Trap Destination dialog box opens.
monitor the MCU activity, and then click OK.
The Community name is a string of characters that will be added to the message that is
sent to the external Manager terminals. This string is used to identify the message
source by the external Manager terminal.
The new IP Address and Community name is added to the Trap Destinations box.
To delete the IP Address of a Manager terminal, select the address that you wish to
a
delete, and then click the Remove button.
The IP address in the Trap Destinations box is removed.
This box lists the currently defined IP addresses of the Manager
terminals to which the message (trap) is sent.
IP Enter the IP address of the SNMP
trap recipient.
Community Enter the Community Name of the
Name manager terminal used to monitor
the MCU activity
User Name Enter the name of the user that is to
have access to the trap.
Authentication Enter the authentication protocol:
Protocol MD5 or SHA.
Privacy Enter the privacy protocol: DES or
Protocol AES.
Chapter 19-RMX Administration and Utilities
Description
All
Versions
Version 1
and
Version 2
Version 3
19-69