Polycom RMX 1500 Administrator's Manual page 171

6
7
8
Polycom, Inc.
There are two methods to define the dialing string:
Using the MCU's IP Address and the Alias string.
A
Using only the Alias string (requires a gatekeeper).
B
Method A (If no gatekeeper is used):
In the IP Address field, enter the IP address of the MGC hosting the destination
conference (Master conference).
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry Queue (EQ), the
Conference ID and Password of the destination conference (Master Conference) as
follows:
EQ ID##Destination Conference ID##Password (Password is optional).
F or E xa m p l e : 10 05 # #2 00 0 6# # 12 34
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
In the Alias Name field, enter the MGC Prefix as registered in the gatekeeper, EQ ID,
Destination Conference ID, and Password, as follows:
MGC Prefix EQ ID##Conference ID##Password (Password is optional)
F o r E x a m p l e : 92 5 10 05 # #2 0 00 6# # 12 34
MCU Prefix as
registered in the
gatekeeper
Click the Advanced tab and in the Cascade field, select the Slave option.
Click OK.
The cascade-enabled dial-out link is created and the system automatically dials out to
Destination Password (optional)
Conference ID
Cascade-enabled Conference ID
EQ ID
Chapter 3-Cascading Conferences
Password (optional)
3-41