Enabling The Send Content To Legacy Endpoints Option; Changing The Default Layout For Displaying Content On Legacy Endpoints - Polycom RMX 1500 Administrator's Manual

Enabling the Send Content to Legacy Endpoints Option

The Send Content to Legacy Endpoint option is enabled in the Conference Profile - Video
Settings tab. It is selected by default.
If High Definition Video Switching option is selected in the Conference Profile - General tab, the
Send Content to Legacy Endpoints selection is cleared and the option is disabled.
If the Same Layout option is selected in the Conference Profile - Video Settings tab, the Send
Content to Legacy Endpoints selection is cleared and is disabled.
Note: Select this option when Avaya IP Softphone will be connecting to the conference.

Changing the Default Layout for Displaying Content on Legacy Endpoints

The default layout that will be used to display Content on the screens of legacy endpoints is
defined by the system flag LEGACY_EP_CONTENT_DEFAULT_LAYOUT.
The configured default layout is 1+4 (
layout configuration by entering a new value for the flag in the system configuration.
To modify system flags:
1
2
Polycom, Inc.
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
In the MCMS_PARAMETERS tab
LEGACY_EP_CONTENT_DEFAULT_LAYOUT entry.
The Edit Flag dialog box is displayed.
Chapter 2-Additional Conferencing Information
CP_LAYOUT_1P4VER
double click the
, -
). You can change the default
2-33