Room (Participant/Endpoint) Level - Polycom RMX 1500 Administrator's Manual

7
When Telepresence Mode is enabled, the Skin options are disabled as the system uses a black
background and the frames and speaker indication are disabled.
8

Room (Participant/Endpoint) Level

Setting the participant/endpoint Telepresence Mode configures the RMX to receive the video
format of the RPX or TPX room endpoints.
To configure a participant/endpoint for Telepresence:
1
2
3
Polycom, Inc.
— Continuous presence - Room Continuous Presence (Default)
— Room Switch - Voice Activated Room Switching
Select the required video layout.
Click OK.
In the Address Book pane, click New Participant (
Telepresence endpoint.
The New Participant or Participant Properties - General dialog box is displayed.
If defining a new participant, enter the required information in the
New Participant – General dialog box for the participant.
For more information, see "Adding a new participant to the Address Book" on page 4-4.
Click the Advanced tab.
Chapter 2-Additional Conferencing Information
) or double-click an existing
2-71