Polycom RMX 1500 Administrator's Manual page 513

Polycom, Inc.
Table 19-4 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag and Value
H264_BASE_PROFILE_MIN
_RATE_HD720P60_MOTION
INTERNAL_SCHEDULER
IP_ENVIRONMENT_LINK
ISDN_RESOURCE_POLICY
(ISDN)
ITP_CERTIFICATION
IVR_MUSIC_VOLUME
Description
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD720P60 resolution using Motion Video Quality.
Default: 1536kbps
When set to NO (default) this flag prevents potential
scheduling conflicts from occurring as a result of system calls
from external scheduling applications such as Polycom
ReadiManager®, CMA™ 4000/5000 and others via the API.
Set to YES to schedule conference reservations using an
external scheduling application.
In H.239-enabled MIH Cascading, when MGC is on level 1,
setting this flag to YES will adjust the line rate of HD Video
Switching conferences run on the RMX 1500/2000/4000 from
1920Kbps to 18432, 100bits/sec to match the actual rate of
the IP Only HD Video Switching conference running on the
MGC.
Note: If the flag MIX_LINK_ENVIRONMENT is set to NO, the
IP_ENVIRONMENT_LINK flag must be set to YES.
The flag value determines how the ISDN B-channels within
configured spans are allocated.
The robustness of the ISDN network can be improved by
allocating channels evenly (load balancing) among the spans,
minimizing the effect of channel loss resulting from the
malfunction of a single span.
Set the flag value to:
• LOAD_BALANCE to allocate channels evenly among all
configured spans.
•
FILL_FROM_FIRST_CONFIGURED_SPAN
To allocate all channels on the first configured span before
allocating channels on other spans.
• FILL_FROM_LAST_CONFIGURED_SPAN
To allocate all channels on the last configured span before
allocating channels on other spans.
Default: LOAD_BALANCE
When set to NO (default), this flag disables the telepresence
features in the Conference Profile.
Set the flag to YES to enable the telepresence features in the
Conference Profile (provided that the appropriate License is
installed).
The volume of the IVR music played when a single participant
is connected to the conference varies according to the value
of this flag.
Possible value range: 0-10 (Default: 5).
0 – disables playing the music
1 – lowest volume
10 – highest volume
Chapter 19-RMX Administration and Utilities
19-21