Polycom RMX 1500 Administrator's Manual page 554

Polycom RMX 1500/2000/4000 Administrator's Guide
•
•
•
•
19-62
The RMX only switches between MPM, MPM+ and MPMx Card Configuration Modes if MPM /
MPM+ / MPMx cards are removed or swapped while it is running.
The Card Configuration Mode switch occurs during the next restart.
Installing or swapping MPM / MPM+ / MPMx cards while the system is off will not cause a mode
switch when the system is restarted – it will restart in the Card Configuration Mode that was
active previous to powering down.
From Version 7.1, MPM media cards are not supported.
Polycom, Inc.