Polycom RMX 1500 Administrator's Manual page 383

3
Polycom, Inc.
The New IP Service - Networking IP dialog box opens.
Define the following fields:
Table 14-32 IP Network Service - IP Parameters
Field
Network Service
Name
IP Network Type
Signaling Host IP
Address
Description
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can
contain character sets that use Unicode encoding.
Select the IP Network environment. You can select:
• H.323: For an H.323-only Network Service.
•
SIP: For a SIP-only Network Service.
•
H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the MCU using this service.
Note: This field is displayed in all Default IP Service tabs.
Enter the address to be used by IP endpoints when dialing into the
MCU using this Network Service.
Dial out calls of participants to whom this network service will be
assigned are initiated from this address.
This address is used to register the RMX with a Gatekeeper or a SIP
Proxy server residing on this network.
Chapter 14-Network Services
14-55