Configuring The Rmx As A Routable Gateway - Polycom RMX 1500 Administrator's Manual

3
4

Configuring the RMX as a Routable Gateway

The RMX must be set as a routable voice gateway in the Office Communications Server
infrastructure. This does not restrict the RMX to just voice operation, rather it means that the
RMX can be set as a destination for a voice route in the Office Communications Server
infrastructure.
The Office Communications Server infrastructure uses the WMI class
MSFT_SIPTrustedAddInServiceSetting to store information for each voice gateway
in the infrastructure. Typically, these gateways are Office Communications Server
Mediation Servers, but in this case, the RMX is set as a voice gateway by creating a new
instance of the class MSFT_SIPTrustedAddInServiceSetting.
Polycom recommends using the Office Communications Server 2007 R2 Resource Kit Tools
to accomplish this.
To set up the RMX/DMA as a Voice Gateway:
1
2
Polycom, Inc.
In the Trusted Hosts list, click the RMX entry and then click the Remove button.
Click OK.
Download and install the Office Communications Server 2007 R2 Resource Kit Tools
from the following URL:
http://www.microsoft.com/downloads/details.aspx?familyid=9E79A236-C0DF-
4A72-ABA6-9A9602A93ED0&displaylang=en
Open a command prompt and navigate to where you installed the resource kit. For
example, C:\Program Files\Microsoft Office Communications Server
2007 R2\ResKit\.
Appendix H-Setting the RMX for Integration Into Microsoft Environment
H-13